TurboJohn LLC © 2025
Designed by TurboJohn LLC © 2025

• Square rear end
• Lots of other uses

• Reads camber from +6° to -6° accurate to 1/4°
• Caster readout from +12º to -4º in 1/2º increments
• All vials are individually checked and calibrated for accuracy
• All critical surfaces are CNC machined for accuracy
• Comes with carrying case

• Reads camber from +6° to -6° accurate to 1/4°
• Caster readout from +12º to -4º in 1/2º increments
• All vials are individually checked and calibrated for accuracy
• All critical surfaces are CNC machined for accuracy
• New stronger magnetic adapter - dead flat surface for accuracy, won't chip or flake
• Comes with carrying case

Here's a super accurate digital caster / camber gauge that reads to .1º camber and at a price any serious team can easily justify. (Caster is measured by bubble vial and reads from -4º to +12º.) It comes with our latest Quick Set™ Dunlop™ Style Adapter and a padded carrying case. As an additional benefit the AccuLevel™ digital readout can be removed and used separately as a digital angle finder for suspension, spoiler angles, and many other things. AccuLevel" ver. 3 included.

NEW Quick Set™ Dunlop™ Style Adapter
This is the fastest way to check your front end alignment. Just hold it against the rim for easy, accurate readings. No spindle adapters required here. Works on virtually any car, any size wheel. New 3 point design makes setting caster easier. Folds for easy storage.

• Measure suspension and spoiler angles and lots more
• Reads to .1º +/- from 0 to 90º
• Simple to use, easy to read, accurate
• Can be quickly field calibrated to maintain accuracy

Great for quick, accurate checks of chassis height. Push it under the car, raise the tape with the knob, pull it out, and read the height. Range is 2" - 8", accurate to 1/16", read on right side of tape. This is the shortened and simplified version of our Chassis Height Measure Tool PN 78320. Quick, accurate, easy to use.

It won't measure height dynamically as you work, it must be removed to read, and it won't measure height while your car is on scales. However it is a great replacement for 'step' type tools, more accurate, more versatile, and at a great price.

NOTE: Reads in metric on left side of tape, accurate to 1mm.

Works in 3 Different Ways

1. Car on the ground - measures chassis height directly, accurate to 1/16".
2. Car on scale pads - measures from top of pads - ground level - to frame directly (no subracting needed here).
3. Measures chassis height dynamically, as you work on the car. Magnet holds tape to frame. Indicator shows height as the car moves up and down. Use set of 4 to quickly see height at all 4 corners. You don't even need to bend over.

• 24" for perimeter frames
• Measures height from 2" to 10" (higher if needed)
• Works 3 ways - with scale pads or without

Works in 3 Different Ways

1. Car on the ground - measures chassis height directly, accurate to 1/16".
2. Car on scale pads - measures from top of pads - ground level - to frame directly (no subracting needed here).
3. Measures chassis height dynamically, as you work on the car. Magnet holds tape to frame. Indicator shows height as the car moves up and down. Use set of 4 to quickly see height at all 4 corners. You don't even need to bend over.

• 24" for perimeter frames
• Measures height from 2" to 10" (higher if needed)
• Works 3 ways - with scale pads or without
• Set of 4

Works in 3 Different Ways

1. Car on the ground - measures chassis height directly, accurate to 1/16".
2. Car on scale pads - measures from top of pads - ground level - to frame directly (no subracting needed here).
3. Measures chassis height dynamically, as you work on the car. Magnet holds tape to frame. Indicator shows height as the car moves up and down. Use set of 4 to quickly see height at all 4 corners. You don't even need to bend over.

• 36" for straight rail cars on right side
• Measures height from 2" to 10" (higher if needed)
• Works 3 ways - with scale pads or without

Works in 3 Different Ways

1. Car on the ground - measures chassis height directly, accurate to 1/16".
2. Car on scale pads - measures from top of pads - ground level - to frame directly (no subracting needed here).
3. Measures chassis height dynamically, as you work on the car. Magnet holds tape to frame. Indicator shows height as the car moves up and down. Use set of 4 to quickly see height at all 4 corners. You don't even need to bend over.

• Set includes 2 each of 2 lengths
• 36" for straight rail cars on right side
• 24" for perimeter frames
• Measures height from 2" to 10" (higher if needed)
• Works 3 ways - with scale pads or without

• Quickest and simplest way to measure toe-in
• Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes (included)
• Folded design is rigid for accuracy and stays put against the tire

Degrees can be zeroed with the car on

• Free floating in 2 directions for no bind
• All new light weight design - reads to 1/2°
• Low profile. Only 1" tall
• Fits on top of scale pads