TurboJohn LLC © 2025
Designed by TurboJohn LLC © 2025

• SS Teflon Gauge Lines
• Good gauge response
• 2500 psi
• Can be removed and reinstalled over and over again without breaking or leaking

• SS Teflon Gauge Lines
• Won't break or leak
• 2500 psi
• Can be removed and reinstalled over and over again

(Part number 4505 shown)

• Stainless steel braided teflon line
• Won't break or leak
• 2500 psi
• Can be removed and reinstalled over and over again

Quickcar 50-500 Toggle Switch Single Pole This QuickCar Toggle Switch is a Standard Single Pole Type. Designed for use with 12 Volt systems. Designed to Fit 12 I.D. Mounting Hole. Sold each. Item Specifics Alternate Description TOGGLE...

Quickcar 50-503 6 Post Magneto Switch QuickCars Weatherproof Magneto Switch includes a means if switching a mag. on and off and extra posts for a oil pressure warning light. Rated for 25 amps at 12V. Item Specifics Alternate Description SWITCH...

Quickcar 50-504 Three Wheel Brake Switch This QuickCar Brake Cut-Off Switch comes with a cover. Switch comes with spade connectors on the back instead of standard type screws. This unit is commonly used on Dirt race cars for the 3 wheel brake switch...

Quickcar 50-505 Toggle Switch Bridged Double Pole This QuickCar toggle switch is an onoff double pole with bridges connecting the (2) top poles together and (2) bottom poles together. Works well for 12 volt electrical systems. Designed to fit into a...

Quickcar 50-510 Push to Start Button This QuickCar starter button is a standard switch used to engage a starter solenoid. The same Push Button comes pre-wired into many of QuickCars Switch Panels and fits a 58 I.D. mounting hole. works well with 12V...

Quickcar 50-512 Momentary Toggle Switch QuickCars Momentary Toggle Switch is designed for #6 ring terminals. Fits in 12 I.D. mounting hole and is rated for 25 amps at 12V. Item Specifics Alternate Description MOMENTARY TOGGLE SWITCH ...

Quickcar 50-520 Toggle Switch With Flip Cover This QuickCar Toggle Switch is a Heavy Duty Model and comes with a Flip-Up Cover. For use with 12 Volt systems. Designed to fit 12 I.D. mounting Hole. Sold each. Item Specifics Alternate...

Quickcar 50-522 Toggle Switch With Black Boot This QuickCar Toggle Switch is a Heavy Duty Single Pole Model and comes with a Black Rubber Cover. For use with 12 Volt systems. Designed to fit 12 I.D. mounting Hole. Sold each. Item Specifics ...

Quickcar 50-601 Red LED Pilot Light This QuickCar LED indicator light has a red lens fits a 12 I.D. hole and has a positive and negative hookup. Commonly placed over a switch to indicate if it is in the ON position. Sold individually these are the...

Quickcar 50-609 Ing Panel Pilot Light Green This QuickCar LED indicator light has a green lens fits a 12 I.D. hole and has a positive and negative hookup. Commonly placed over a switch to indicate if it is in the ON position. Sold individually...

Quickcar 50-610 Boot for Toggle Switch This boot is designed for QuickCars standard toggle switches to help prevent water or other cleaning chemicals from getting into the switch. Sold individually black boot is elasticflexible so it will not tear as...

Quickcar 61-71012 12 Gauge Line Kit QuickCars -4AN steel braided hose 12 in length with 18 NPT fittings. Male fitting to got to the enginefuel log and female fitting will fit the back of QuickCars 2-58 mechanical gauges. Item Specifics ...

Quickcar 61-71024 24 Gauge Line Kit QuickCars -4AN steel braided hose 24 in length with 18 NPT fittings. Male fitting to got to the enginefuel log and female fitting will fit the back of QuickCars 2-58 mechanical gauges. Item Specifics ...

Quickcar 61-71036 36 Gauge Line Kit QuickCars -4AN steel braided hose 36 in length with 18 NPT fittings. Male fitting to got to the enginefuel log and female fitting will fit the back of QuickCars 2-58 mechanical gauges. Item Specifics ...

Quickcar 61-71048 48 Gauge Line Kit QuickCars -4AN steel braided hose 48 in length with 18 NPT fittings. Male fitting to got to the enginefuel log and female fitting will fit the back of QuickCars 2-58 mechanical gauges. Item Specifics ...

Quickcar 61-719 Quick-Light Fuel Pressure Kit This QuickCar Fuel Pressure Warning Light Kit features a Green Lens and a Sending Unit that is pre-set to activate at 4 PSI and lower. All wiring included. Sold as one complete kit. Item Specifics ...

Quickcar 61-722 Pressure Switch Aluminum Tee The best way to mount a pressure sender to a mechanical gauge. QuickCars light weight Aluminum Tee has 2 18-NPT ports and 1 -4AN port so no extra adapter is needed in plumbing a fluid line to a gauge. To...

Quickcar 61-730 4 PSI FuelWater Pressure Switch This switch is commonly used to activate warning lights on QuickCar gauge panels and Quick-Light kits. It has a 4 PSI pre-set activation point. Unit has 18 NPT threads to install in fuel water system...

Quickcar 611-900 12-NPT Temperature Seat Bung This QuickCar fitting is an adapter for a mechanical temperature gauge probe. Features a 12 NPT outside thread and is made from high-quality brass material. Sold each. Item Specifics ...

Quickcar 611-901 Aluminum 12-NPT Temperature Seat Bung This QuickCar fitting is an adapter for a mechanical temperature gauge probe. Features a 12 NPT outside thread and is made from high-quality aluminum and now anodized black. Sold each. ...

Quickcar 611-902 Aluminum 38-NPT Temperature Seat Bung This QuickCar fitting is an adapter for a mechanical temperature gauge probe. Features a 38-NPT outside thread and is made from high-quality aluminum and now anodized black. Sold each. ...